How to repair a damaged area of liquid wallpaper? Instructions from TM Bioplast

Liquid wallpaper TM Bioplast is a modern decorative coating that is distinguished by a seamless texture, environmental friendliness and heat and sound insulation. One of the main advantages of liquid wallpaper is the ability to locally update damaged areas without completely dismantling the wall. In this article, we will consider how to properly restore the coating and when you can do without additional material.

Is it possible to repair liquid wallpaper without completely repairing the wall?

Yes, liquid wallpaper is easy to repair locally. Thanks to its fibrous structure, the material can be removed only from the damaged area and restored separately.

That is why liquid wallpaper from the Bioplast TM catalog is a practical solution for both residential premises and offices or commercial facilities.

What damage occurs most often and requires updating?

The most common cases:

• mechanical damage;
• local pollution.

In most such situations, it is sufficient to restore only the problem area without involving prosit at the entire wall.

How to properly update a damaged area of liquid wallpaper?

The update process consists of two options and several sequential steps that do not require special skills.

Surface preparation

First, moisten the damaged area with warm water using a sponge or spray bottle. Wait 10–15 minutes during which time the liquid wallpaper will become soft. Then carefully remove the damaged or contaminated layer with a spatula and clean the base from any remaining material.

Next, you can choose one of two update methods:

1. Apply new material - if the damage is very noticeable or the layer of wallpaper is not enough.
2. Smooth out already applied liquid wallpaper - if the area is small and the material can be leveled without additional mixture.

This approach allows you to quickly restore the surface and maintain a neat appearance of the wall.

1. Preparing the mixture for the damaged area

For repairs you can use:

• Leftovers of previously dried liquid wallpaper;
• buy liquid wallpaper, but be sure to pay attention to the batch number when purchasing the product.

The material is soaked in warm water according to the manufacturer's instructions and mixed thoroughly until a uniform consistency.

Application and leveling

The finished mixture is applied to the prepared area with a transparent plastic trowel. The edges of the new layer are carefully “stretched”, combining it with the base coating.

Detailed recommendations for application and preparation of the material are given in the ➡️ Instructions section

2. When can you do without additional material?

In some cases, the use of a new mixture is not necessary. If the damaged area is small and does not have deep defects, a simplified method of restoration is possible.

Simplified update option

• Wet the damaged area with water.
• Carefully remove only the dirty or deformed part.
• Smooth out liquid wallpaper that has already been applied.
• If necessary, slightly redistribute material from adjacent areas.

After drying, the surface regains a uniform appearance, and the intervention site becomes almost invisible.

Drying and result

The drying time of the renewed area is on average 24–48 hours at normal temperature and ventilation. After complete drying, the color and texture will even out naturally.

Cost and economic benefit

Local renewal of liquid wallpaper allows you to significantly save money, as it does not require a complete repair. For current product prices, see the ➡️ Price section

Where can I find more useful information?

Read more tips, instructions and examples of using liquid wallpaper in the ➡️ Blog section

Liquid wallpaper TM Bioplast is a convenient and maintainable coating that is easily restored even after damage. Following the correct technology allows you to quickly update the surface, preserve the aesthetics of the interior and avoid unnecessary costs.